Tuesday, May 31, 2011

As can be seen from the above picture, the pedalboard has been midified. I used an mpc32xrs MIDI controller and a csr32 reed switch loom from Midi Gadgets Boutique, their products and service come highly recommended. Over the weekend one of pedals began to stick, probably a weather thing. Fixing the problem was easy but in the process I broke one of the reed switches. Jordan from MGB offered to send an FOC replacement but suggested it would be quicker to obtain a replacement in the UK, MGB are based in Bulgaria. Farnell shipped a replacement next day.

If you look carefully at the picture above, you may notice that the reed switches are held into their wooden blocks with Blu Tack, it just stops them from falling out. This temporary solution has worked quite well! I will of course use a more suitable location method now I'm sure of the switch position.  Next job is to enclose the fragile wiring in a wooden case.

1 comment:

KeninPC said...

Paul, you stated this was a temporary solution!? Have you selected or come up with a more permanent way of anchoring and mounting the switches??

Has anyone out there suggested another method??

Keith