Sunday, January 18, 2009

I had originally sourced a header tank from a Rover 214, however I wasn't too happy with its size.
Hunting around my local scrapyard, I found this header tank from a VW Golf. It fits very nicely in the space available. I am going to relocate the air filter. You can see the big 70mm elbow just below the header tank.

Below is the filter I'm considering. C7010 is the most compact filter with a 71 mm O/D neck.



I bought a loom from Premier, however the first thing I did was to pull it apart! I've removed the wiper, washer and heater wiring and significantly shortened the dash loom. I'm going to have to add wires for the fuel pump and fan relays, they are controlled by the ECU mounted in the rear.

No comments: